polymer clay doll

All posts tagged polymer clay doll

The Froud Workshop (creating a faery bust with Wendy & Toby Froud)

Published April 6, 2017 by baileyquillincooper

Two weeks ago, I attended a weekend workshop at The Fernie Brae with Wendy Froud and Toby Froud where we made mixed-media bust sculptures of faery creatures. I was SO unbelievably excited for this event! I had already taken Toby’s amazing rod puppet workshop last year, but I had yet to meet his mother Wendy, who also happens to be a master doll-maker, writer, poet, and puppet fabricator, as well as one of my top art heroes. The multitude of art books that Wendy has created with her husband the legendary Brian Froud, as well as her instructional Gnomon Workshop DVD from many years back, Creating a Faery Figure with Wendy Froud, have been a major source of artistic inspiration for many, many years. Wendy was in town for just a short time, having flown all the way from Devon to visit with Toby and his family. I jumped at the opportunity to sign up for the workshop, and considering that I was more than just a little bit starstruck to meet the woman who was the fabricator of Yoda and the creatures of The Dark Crystal, The Labyrinth, and pretty much everything that mattered to me from my young adulthood onward, I think that I behaved myself rather well. I couldn’t resist a picture with her on the last day of the workshop, of course, but that’s to be expected.

17499364_10101717396465907_2647029883604720315_n

The weekend kicked off on Friday night with a meet n’ greet Goblin Feast party at The Fernie Brae. Wendy, Toby, Toby’s wife Sarah, and Toby’s adorable son Sebastian were all there to sign books, take photos, and accept compliments. There were enough of Wendy’s gorgeous goblins and delicate little fairies for sale to make my fingers twitch, but I remained as fiscally responsible and steadfast as any millennial who has recently purchased their first home. It didn’t stop me from thoroughly enjoying them up close, however. I lifted a lot of these photos of the event from The Fernie Brae’s Facebook page, by the way.

17522547_1477528745632397_1190710152514845681_n.jpg

17522617_1477528802299058_1769151555639831234_n

17523246_1477528855632386_1224221811664996163_n.jpg

17498475_1477528835632388_6148737431692356948_n.jpg

17499245_1477528858965719_1403229607454858845_n.jpg

17498809_1477528888965716_5192425912122983625_n

17499190_1477528838965721_7860476822245266299_n.jpg

17522538_1477528898965715_8122663095374354611_n.jpg

I was especially smitten with Yiren the Whining One aka Blossom, the scruffy girl-goblin on the far right.

16864502_1445025788882693_3539985724695950083_n

She was the first character that I acquired of my full collection of the limited-edition F.A.O. Schwarz Froud goblin plushes, after all.

17426220_1477528892299049_7598645651167667442_n

Ahem–anyway, the workshop! It was about twelve hours long in its entirety. The classes ran from around 10AM-5PM on Saturday and Sunday, with an hour break each day for lunch. Wendy and Toby both had brought with them a couple of examples of busts that they had either been completed prior to the class, or were still works in progress.

16807225_1439160486135890_4668390112121210081_n.jpg

16830973_1439160489469223_4550747581914962411_n.jpg

17361734_1471837046201567_8182590115463981099_n.jpg

17499257_1475211702530768_9108420640959326889_n

17458015_1475211815864090_2686674125761510585_n.jpg

On Saturday morning we started with a special guided meditation that was written for Wendy by Jessica Macbeth, the author of Brian Froud’s The Faeries’ Oracle. The theme of the meditation was the changing of the seasons; somewhat of a visual transition or a verbal release from the icy grip of Winter into the quickening of Spring, and of course the various fantastical faery creatures and spirit guides that one might personally associate with each. The idea was to stoke the creative mind and maybe spark some creative inspiration in the process. After Wendy read aloud the mediation, we were encouraged to sketch some of the characters we met or experienced within our mind’s eye. Most of the class either chose to design a Winter spirit or a Spring spirit. I myself had decided on a Spring variant of the Pooka, a shapeshifting trickster faery of Celtic mythology with blazing golden-yellow eyes that usually chooses to appear in the guise of a wild black stallion, a black goat, or a black hare…which is just perfect for Easter! Also I just might have just seen the classic 1950 Jimmy Stewart film Harvey for the first time shortly before the workshop, which only served as an additional inspiration to make some kind of strange oversized rabbit character.

harvey1-1.jpg

The six-foot, three-and-a-half-inch tall rabbit Harvey is apparently meant to be a Pooka in the film, but regardless of whether he really is or isn’t, I need to add that painting to my list of movie paintings that I want badly enough to paint for myself. I guess it wouldn’t be the first.

12799043_10101244627209287_3496249651384260762_n.jpg(Yep, that is the Boring Blue Boy from “Coraline.”)

I had even sketched a few rough drawings before that weekend just based on the description of the workshop that I had read online. I knew that I wanted to make some kind of Spring character that incorporated my ideas of creepy bunny rabbits, daffodils, and other seasonal blooming flowers.

17424667_10101709529676017_4171943910755850536_n.jpg

After the guided meditation, I had an even better idea of the type of character that I wanted to create. I saw in my mind a few more specific details, like hairstyle, teeth, facial expression, and lots and lots of freckles!

unnamed.jpg

Once we all had few ideas to work with, we began our sculptures by making an armature out of bent wire, aluminum foil, and masking tape.

IMG_6468.jpg

After this we began to evenly cover the skull armature with polymer clay, specifically a custom blend of a light flesh tone and white/champagne color Puppen Fimo, and map out the proportions of the facial features with a series of simple shapes and blobs of clay. Unfortunately, I got so heavily involved with what I was doing after this point that I completely forgot to take any more in-progress photos until I basically had a fully sculpted head, other than this great one that my friend Laura got of me…but she’s a much more fastidious photographer than I.

17457533_10153807870902395_4210883366553118073_n.jpg

Rest assured that the sculpting process was still very much the same as all of my other Froudian creatures that I’ve ever made in the past, including Toby’s puppet workshop last year.  Definitely have a look at that old post if you’re interested in finding out exactly how we like to do these things!

By the end of the day, everyone had created a very fascinating and completely diverse array of faery creatures for Toby to bake in the craft ovens. Luckily I was able to snap a couple of photos of that.

IMG_6470.jpg

IMG_6471.jpg

IMG_6472.JPG

In case you were wondering, this one’s mine!

IMG_6514.JPG

On Sunday we returned to the workshop to find that all of our characters had been baked beautifully. We promptly got to work on the painting, wigging, and clothing fabrication process. I always totally love that part, but again was a bit too involved in what I was doing to take any photos. If you really wanted to know more about that process, then check out this recent post that I wrote about Mama Kringle, another personal project that I happened to finish during the same weekend as the workshop.

The last pictures I took from the workshop itself were the amazing group photos of the finished (or nearly finished) pieces at the end of the second day.

17522592_10101716964910747_6722167653502615650_n.jpg

They all turned out so very different and interesting that I kept thinking how I would love to see either a movie or children’s book that featured the entire group as characters!

17499117_10101716964930707_4517901176952811309_n.jpg

Note Toby’s Napoleonic goblin and Wendy’s ethereal forest spirit at dead center.

17553763_10101716965000567_1506146128062502942_n.jpg

Here’s a better view of them, with my Pooka (who I decided to name Padraig) in the far left.

17499352_10101716965110347_453721983602715555_n.jpg

I really love the tongue on this last one!

17499407_10101716965170227_4594029200419800763_n.jpg

Well I suppose that’s everything as far as my workshop photos. It was such an amazing experience to quietly work on a sculpture right next to two of my artistic heroes, occasionally stopping to talk about mythology, art supplies, faeries, and pepper jack moon cheese (which is apparently a favorite Froud work-time snack…who knew!) I’m gonna cut myself off from raving any more about how awesome it was, but if you guys have any questions, feel free to leave me a comment below!

In my next post I will be featuring some more quality photos of the finished Padraig bust, so stay tuned for that!

 

Advertisements

Mama Kringle Final Photos!

Published April 5, 2017 by baileyquillincooper

For my last Mama Kringle post, here’s a huge collection of finished photos that I snapped over the weekend. They’re unprocessed, disorganized, and taken from just about every angle I could think of because I’d always rather have too many photos than not enough! Enjoy!

Mama Kringle

IMG_6604.jpg

IMG_6600.jpg

IMG_6601.jpg

IMG_6602.jpg

IMG_6603.jpg

IMG_6609.jpg

IMG_6596.jpg

IMG_6621

IMG_6623.jpg

IMG_6659.jpg

 

IMG_6629.jpg

IMG_6631.jpg

IMG_6639.jpg

IMG_6649.JPG

IMG_6652.jpgIMG_6641

17523021_10101725736721967_186005959033670202_n.jpg

And one more, because there’s just something inherently awesome about allowing a two-dimensional character to transcend into the corporeal plane!

17813710_10101727531869477_1589911092_n.jpg

 

 

 

Mama Kringle Work-in-Progress Part 1: Design, Sculpting, Painting, and Assembly

Published April 4, 2017 by baileyquillincooper

As promised, I took a lot of work-in-progress photos of Mama Kringle. Normally I like to write a series of many entries as I’m working on a doll and so I can post my progress photos as I go along, but let’s just say that I have a lot of catching up to do this time. Due to the sheer volume of the photos I have taken since I first started on her, this entry and the one that will follow are going to be mostly photos with very brief explanations in between. If you guys have any questions about any of them or my process in general, please feel free to comment below!

I. DESIGN

Without further ado, here are first some images of Mama Kringle from my children’s book, Kris & Krampus Kringle, to serve as a reminder of the character design.

Mama Kringle Design

I usually make my dolls just based off of a singular idea or sketch and sort of make the details up as a I go along, so making a three-dimensional version of a pre-existing fully-formed character is somewhat rare for me and a lot of fun.

Mama Kringle Portrait

II. SCULPTING

I took inventory of my massive polymer clay collection and gathered an assortment of colors to make a custom skin tone. Some of them were quite sparkly.

IMG_5849.JPG

My workspace, complete with weird Netflix documentary about men who like to dress up as giant masked dolls.

IMG_5851.JPG

A pair of beautiful glass eyes that I found on eBay.

IMG_5854.jpg

A lot of the more ornate and unusual glass eyes that I buy are intended for Dollfie ball-jointed dolls. I know that the Frouds and many other doll-makers out there really don’t like glass eyes because they can be somewhat restricting and a little bit tricky to focus, but I personally really have a thing for them. There’s always such an interesting variety of them online that sometimes I will even get an idea for a character based solely on a pair of eyes that I find.

I always start by making an internal structure for the neck and skull out of looped armature wire, epoxy putty and fine jeweler’s wire for some extra grip, shaped pieces of aluminum foil, and then masking tape.

IMG_5855

IMG_5857.jpg

IMG_5858

I made sure to gore out some eye sockets before putting any clay onto the skull.

IMG_5868.jpg

Then I mixed up all this clay by hand. It took a while.

IMG_5869.JPG

I seriously need to get me a food processor.

IMG_5870

I then set the eyes into the sockets as I began to cover the skull with clay. This is how I started to form the face with basic shapes first.

IMG_5873.jpg

IMG_5874.jpg

IMG_5875.jpg

This is what she looked like by the end of my first all-too-brief sculpting session.

IMG_5878.jpg

This one is from my Instagram, probably after I returned to her for another brief session a day later.

IMG_5886.JPG

Another Instagram photo after she was ready for her first trip to the oven.

IMG_5895.JPG

A wonderful thing about polymer clay is that you can bake it in layers to better save your work. It definitely helps you to prevent stressing over things while you’re working quickly, like delicate facial features that you wouldn’t want to accidentally smash when you’re working on the ears or the back of the head. You can bake most polymer clays at least three times before the coloration or texture changes that much.

Into the oven with you!

IMG_5896

Creepy…I really love my Amaco craft oven though.

IMG_5897.jpg

The glitter clay shines even more after it’s been baked!

Ears next.

IMG_5913.JPG

Next I made her hands, while watching my old Wendy Froud DVD and rocking out with my rod puppet, Lucia.

IMG_5952.JPG

As per Wendy Froud’s hand sculpting technique, they actually do start as a simple throwing up the horns shape before I add the other fingers on one by one. Apparently I didn’t take any pictures of that, but here they are going into the oven.

IMG_5925.JPG

Just waiting around for some hair.

IMG_5953.JPG

I think all the glitter clay worked out great for her skin, but by this time I had also discovered another kind of special effects Premo Sculpey clay at Blick called, “Opal.”

IMG_5964.jpg

I thought this one was so cool, and was pretty excited to try it out in her hair!

IMG_5965.jpg

I made the basic structure of her hair by twisting many different other colors of polymer clay together into tapered rope-like shapes, fixing them onto her scalp, and then adding additional little branches onto the larger ropes in the same exact way. Working my way in a circular pattern from the forehead and the nape of the neck to meet in the middle on the crown of the head, I eventually ended up with this.

IMG_5969.JPG

III. PAINTING

Time for some paint!

IMG_6206.JPG

I love that photo.

After trying out many different kinds of paints and doll-painting techniques over the years, I now prefer to use many thin glazes of acrylic paints over the polymer clay until I can build up the depth of color that I want.

IMG_6222.JPG

I occasionally will also use glitter and metallic paints, acrylic varnish for varying levels of shininess, and even stuff like nail polish and clear nail varnish for things that I want to be really shiny and wet-looking (like a tiny doll manicure!) Mama Kringle ended up being very colorful and sparkly, and a very fun one to paint.

IMG_6223.JPG

Next I made her some feet, which were even balanced enough to stand on their own!

IMG_6224.jpg

Although you can only ever see the tips of Mama’s shoes poking out from her robe in all of my illustrations of her, I decided to make the the tops of the shoes a little bit fancy. I looked at lots of photos of Victorian shoes for reference.

IMG_6279.JPG

I think they looked way better after I stained them with acrylic paints so that they would more closely resemble worn leather.

IMG_6280.JPG

Here she is all painted and ready to be assembled!

IMG_6285.JPG

IV. ASSEMBLY

To assemble her body, I began by making a basic skeleton out of armature wire with a spinal cord, pelvis, and stick limbs. I used more epoxy putty on the pelvis, kneecaps, and wherever I needed to make some strong joints that would’t shift around while I got the proportions on the shoulders and the limbs right.

IMG_6286.jpg

I also added some wooden skewers to the femurs and other larger bones for some additional strength.

IMG_6289.jpg

I made her elbows on loops of wire like hinges so that I would be able to pose her arms later.

IMG_6293.jpg

Next came the foil.

IMG_6297.jpg

In case you are wondering what I was watching this time, it’s “The Secret of Roan Inish,” a charming Irish film about Selkies. It was great to watch it again along with my small collection of other Irish movies around St. Patrick’s Day!

IMG_6298.jpg

Side view:

IMG_6299.jpg

First layer of masking tape to hold her all together:

IMG_6300.jpg

I later added a bit more masking tape to bulk up the limbs and strengthen the skeleton.

IMG_6329_2.jpg

After I get a strong yet still posable skeleton, I begin to flesh out the body with batting…yes, just like in the Wendy Froud video in the background.

IMG_6344_2.JPG

Batting sticks to itself and is pretty easy to shape and sculpt with a little finagling, so I usually tend to make a pretty detailed body shape with this step.

IMG_6342_2.jpg

The very last step that I do before I move onto the costuming is I make a cloth body stocking over the batting. This creates a more cohesive “skin” and holds everything underneath in place. To do this I use some kind of thin, stretchy fabric; lycra in this case, and carefully stretch it over the toro and the limbs. I cut it all to size and then glue and hand-stitch it tightly over the batting “guts.”

IMG_6367_2.jpg

And there you have it, the design, sculpting, painting, and assembly of Mama Kringle! The last bonus photo I found on my camera roll before I moved onto the costuming was one of Mama standing next to Lucia for a size comparison. For the record, Lucia stands at about 17″ tall, and Mama Kringle is about 19″ tall without a stand. I’m really enjoying working in this larger scale!

IMG_6369_2.JPG

Ok. Well that was pretty exhausting, and I again apologize for all the major catch-up posts that I’m having to do now! The good news is, you won’t have to wait very long at all for part two of the work-in-progress post since she’s already finished now, and I just have to type it all out. Be sure to check in again for that sequel soon!

It’s Been Forever

Published March 30, 2017 by baileyquillincooper

It’s been forever. It’s honestly been so long that I kind of don’t even want to bother going into everything that’s happened to me since November. I’ve also been so stressed out over the past couple of months that I hardly even remember any of it. So here’s the extremely condensed version, in bullet points.

  • We bought a house. It’s our very first one, it looks like a fairytale cottage, and it is perfect.
  • Immediately after moving into the new house in early December, we got slammed with four freak blizzards that hit not even a week apart from each other. Well really, it was more like four and a half. After Portland Snowpocalypse IV in January 2017, which was the biggest and the baddest of them all and gave us an entire foot of snow overnight, we also got hit with a final ice storm just for good measure.
  • The flurry of the holidays came and went, and as promised my book was released on Amazon on Krampusnacht, December 5th, 2016. Between prolonged moving drama, DIY home improvements, blizzards, blizzard-related car troubles, fulfilling mountains of Kickstarter rewards for my books campaign, and a minor concussion from slipping on the ice and cracking my head on our new front steps, we somehow still managed to throw our first Yule housewarming party at our house, and I somehow still managed to have that book release party at The Fernie Brae. Toby Froud even came to the party to buy a signed copy for his son, Sebastian. It was truly unreal!
  • I also got to participate in my first tabling event for my book, the Eyeball Burp Zine East Portland Holiday Bazaar at the Jade/APANO Multicultural Space. It was the first year of this particular event and was a lot of fun despite all of the stressful things we were going through at the time. I really hope to do it again this year, as well as a lot of other events like it (since I should presumably have a lot more time for this kind of thing the second time around.) My book has been for sale at The Fernie Brae and Vine Gogh, the painting studio where I teach classes, but the next time around I hope to have more time to market it to all the indie bookshops like I had originally planned. Honestly with the way everything went down at the end of last year, I was super lucky to have even accomplished all that I did, so I really can’t complain!
  • Just as soon as we thought things were finally starting to calm down a little in February, Grendel squeezed through a gap in our fenced front yard to chase after another dog, was hit by a truck right in front of our house, and then ran away. We were both home when it happened but neither of us had actually seen the accident occur. I was inside of the house and Martyn was outside with Grendel when it happened. Martyn was just around the side of the yard taking out the trash when he looked up to see Grendel tearing down the street at an unnatural pace. Although Martyn is a really fast runner, Grendel was completely terrified and running so fast that none of us could catch him, and we soon lost sight of where he had gone. There was a good hour when we couldn’t find him, even with the help of the man in the truck who had hit him, a random bystander on a bicycle, Martyn in my Beetle and me on foot calling his name everywhere around the park and the neighborhood. Luckily the man on the bike happened to see Grendel run into the yard of a neighbor who lives on the other side of the park. The woman who lives there and the man on the bike discovered Grendel hiding behind a shed in her garden. Grendel then went to the emergency vet where it was determined that he had no broken bones or serious injuries, only some significant bruising and all his nails worn down to the quick from running so frantically. It took many difficult nights of doggie painkillers, assisting him in lying down and standing up, and dealing with an obvious bout of PTSD, but eventually, he recovered.
  • In March we got zapped big time on our taxes due to a silly error on a W-4, celebrated St. Paddy’s Day with our friends regardless, and then Martyn found out that he was being laid off from his job at the magazine. This was of course in many ways completely terrifying for us, but we were also both in many ways ready for a major change. When we found out that Martyn would be losing his job in two weeks, we just tried our best to stay calm and view it as another blessing in disguise. Martyn put together a gorgeous illustrated resume and went door to door searching for anywhere that would take him. He was hired at a local pub a week later, where we both suspect that he will actually be much happier. His orientation was yesterday and he will probably be starting his training next week.
  • The latest incident has been Grendel tearing up our house while we’re gone for the past couple of days. We’re not exactly sure what the issue is, but it’s all pretty extreme and out of nowhere. The latest unusual theory involves my old phone that Martyn had decided to keep for himself and use just for Spotify. A few days ago it apparently “woke up” on its own while inside of a drawer, and proceeded to sound off alert bings and buzzes for every text message that had been received on the current phone all year. Martyn realized that this could possibly be the cause of Grendel’s sudden and unexplained freak-outs when he was home with Grendel today, heard the old phone in the drawer buzz and his own phone bing with a Facebook notification, and observed Grendel waking from a deep sleep to start panting, drooling, growling, and trying to look out the window to determine where the sounds were coming from. We really hope that we might have solved it this time, but we’ve bought him another crate just in case. Unfortunately even that won’t fix our shattered blinds or all of the other damage he caused…but this is just another big expense and stressful situation that we have no choice but to get through.
  • And lastly, through ALL of this, I have just been all the more determined to continue creating in my new art room and to wrap up some projects that have been taking me much longer than I had originally anticipated. My idea to create posable mixed-media art dolls of all three of the characters from my book is well underway. I actually just finished up Mama Kringle over the past weekend and plan on taking some quality, non-Instagram photos of her this weekend.
  • I also was still able to attend the Toby Froud and Wendy Froud workshop at The Fernie Brae over the past weekend. It was a completely amazing experience that I still can’t stop thinking about it. We created polymer clay and mixed-media bust sculptures of faerie creatures over the two-day workshop. Everyone’s pieces turned out to be so beautiful and so different from each other that the group photos were really something to behold. I was pretty proud of my own piece, which was a creepy Spring pooka who I have decided to name Padraig. I will also be posting some photos of him after the weekend.

So there you have it, that has pretty much been my life over the past few months. If you follow me on Facebook or Instagram all of this might have been extremely redundant, but I just felt that I needed to get the crazy catching-up post out of the way before I could return to my regular work-in-progress entries. I promise that my next post will have actual work-in-progress photos of Mama Kringle, and I actually remembered to take many of them this time! Until then, farewell, and thank you all so much for your continued understanding and encouragement. Getting all of this out has been a major relief!

Also, here are some photos of our new house for the sake of having some photos in this post!

Redfin photo:

15285065_10101556964976897_4106905954791975293_n

The day we got the keys:

15284119_10101556948554807_7252275862980429846_n

Grendel’s first day at our new home:

15326348_10101560741428857_8721573999991025780_n

Our house after the first couple of snowstorms:

15542066_10101591066187797_6391485364766572717_n

Our house during Portland Snowpocalypse IV:

15940686_10101624508384367_3203343792388403326_n

I need to get some Spring pictures now that the snow has finally thawed and the flowers are starting to bloom.

Oh, and here’s two last bonus photos from the book release party at The Fernie Brae!

15338857_10101578986755077_1046402515820731487_n-1

15492531_10101578986765057_3888735203684404116_n

Lucia the Puppet: Final Photos!

Published April 26, 2016 by baileyquillincooper

Here’s the moment you’ve all been waiting for…the final photos of Lucia, the rod puppet that I made at the Toby Froud workshop last week!

Lucia Full Body

Upper Body with Ear Visible

Bust

Birdseye Three Quarters

Hairbow Close Up

File_007

Back of Hair

Close Up Bodice and Hand

Close Up Basket

The crazy collage I made of all of those close-up shots:

Close Up Collage.jpg

A silly one of her looking shocked and horrified in front of my bureau mirror, because she does that so well:

File_008 (1)

If you remember, I made Lucia partially with FIMO Effect Nightglow. Here is the best picture I could get of her glowing in the dark, which was really hard to photograph and looks way more creepy cool in real life…lately I’ve been using her as a night light!

Lucia Glowing

That’s all folks!

 

 

Lucia the Puppet: Wigging and Final Details

Published April 26, 2016 by baileyquillincooper

I actually finished up Lucia the puppet very late Thursday night/early Friday morning. I basically pulled an all-nighter before my early shift and got only two hours of sleep because I was more tired of the disaster that the art room had become and was feeling really eager to get things back to normal. So anyway, this is going to be a quick post that just explains how I did the last major steps to finish her all up–her hair and a few other little details. I plan on following this post pretty much immediately with another one that will have some photos of her all finished…I took quite a few of her outside yesterday that will have to do until I can get some more professional pictures at a later date.

Before I even started on her hair I made a little accessory for her to hold on her arm. Its a little basket holding some moss, flowers, and a robin’s egg.

IMG_2629

I found the robin’s egg shell on the first day of the workshop when I was walking back to my car. Although it was just a cracked and empty shell it just looked so perfect; just like a robin’s egg candy. I decided right when I found it that I was going to try to find a way to incorporate the eggshell into my final puppet. It was very fragile so it took me a little while to figure out how I was going to do it. I ended up filling the shell with a two-part epoxy to bond it together and prevent it from crumbling. I placed it inside of a miniature basket that I purchased from Jo-Ann’s and attached that floral rope wire as a handle. Then I arranged some moss and flowers around the egg so that it would look like a little nest and also hide all of the visible cracks on the eggshell.

IMG_2630

I later added another small green twig with pink flower buds to the basket, which you will see later when I post the pictures of the finished piece.

For the wigging, or tedious attachment of her full mane of hair, I already had a cut piece of Tibetan Lamb’s Wool all picked out. I believe the color of the swatch I used was called “blushing pink” from my favorite OOAK doll supply store, The Morezmore Estate on eBay. If you’re into making OOAK polymer clay dolls, creatures, and puppets, then this is the best one-stop shop that I have ever found. The owner Natasha Red October is super nice and is a polymer clay doll maker herself so she knows her products very well. She also has a work in progress blog where she explains many of her own techniques step-by-step. I discovered her back in about 2009 when I was first teaching myself how to make really professional multi-media polymer clay dolls and was so happy when I found her blog and shop. She has taught me so much about doll making and she even sends me cool free samples of supplies whenever I order from her! Here’s a photo of the lamb’s wool I used and my other wigging supplies:

IMG_2631

One of the key things I learned from following Natasha’s blog was how to properly wig a polymer sculpt. The glue she recommends is the clear gel permanent adhesive manufactured by Beacon, Fabri-Tac. I know that this isn’t the only glue that doll artists use for this purpose–Wendy Froud and Toby Froud for instance both prefer another permanent glue called Barge. I’ve never tried Barge before, but I like Fabri-Tac well enough because it doesn’t give off any strong toxic fumes and I can use it in my small unventilated art room without much fear of killing my brain cells. The only main problem that I had with Fabri-Tac once I got past the initial figuring out how to work with such a gooey, stringy, sticky substance was how quickly it gets too thick and goopy to use while still inside the bottle (like an old nail polish that you have to throw away before you can use it up) and how darn expensive it always is. As a result you may think you’ve saved yourself some money by buying the biggest bottle with a coupon, but after you use it to wig a couple of dolls or even one human sized werewolf costume you’re probably still going to have to throw the last third of it away before you’re done with it because the consistency just becomes too difficult to work with anymore. There’s supposed to be a trick where you can add a little paint thinner to the glue once it gets all gloppy to get it back to normal for a little while. I’ve tried it and it kinda worked for me once, but I’ve found that most of the time the thinner and the glue stay separated so what you get is just a watery, not-sticky-enough mess…which is totally not worth the trouble!

Luckily I met a lady at the Toby Froud workshop last week who is the arts and crafts coordinator at the Craft Warehouse in Beaverton. She told me she get me a discount if I ask for her and clued me in on a little secret: Beacon’s 3-in-1 glue is basically the same exact glue as Fabri-tac but for a fraction of the price. I believe the only real difference between the two is that Fabri-Tac is archival quality for scrapbooking and 3-in-1 is not, but if you’re just using them to wig a doll that really doesn’t make any difference whatsoever! So I decided to take her up on that advice and just purchase a small bottle of 3-in-1 to glue the hair onto my puppet.

The way that I wig a doll is by cutting a few small locks of hair from the wool pelt and laying them out on my workspace. I then pick up each lock of hair at a time, spread a little bead of glue onto one end, roll it onto a toothpick, and then use the toothpick to press and hold the clump of hair onto the scalp until it catches, which is usually less than ten seconds.

IMG_2632

I then repeat this process again and again until I complete the first row of hair.

IMG_2635

I’ve used all different materials to apply hair to both dolls and costumes; lamb’s wool, synthetic hair from wigs or otherwise, faux fur, real animal fur, human hair, silk roving, you name it. I’ve got to say that of all the materials I have used Tibetan lamb is still my favorite. The extra fine strands are just perfect for a miniature scale and the variety of different colors and textures that you can choose from is really great for so many different projects.

The particular swatch of wool that I used for Lucia’s hair was a second quality piece that I got for a discount, which probably had something to do with the messy erratic texture that was not quite straight and not quite curly. Although it was a little frizzier than average which made it slightly more difficult to work with, I still managed to cover her scalp very evenly.

IMG_2634

After I get the first row of hair down I tug at the ends of the locks to make sure that everything is secure. Using my fingers I brush out and remove any loose flyaway hairs that didn’t hold with the rest of them.

Then I move up a couple of centimeters and start on the next row. If I want my character to have a very full and bushy head of hair (which in almost every case, I do) then I really don’t leave a whole lot of space between the two layers at all. Here she is after four or five layers of hair:

IMG_2637

As I near the crown of her head, I also start to apply the hair around her ears:

IMG_2639

While I was working on her hair I remembered that I had some really cool shimmery iridescent fibers that I wanted to try out on this puppet. I picked up a little bag of them a couple of years ago at this amazing sculpture and art supply store called Earth Guild in Asheville, North Carolina.

IMG_2640

They seemed like they would be just the right scale to mimic fairy hair sparkles/hair tinsel like I have in my own hair, so I started adding in a few bunches to Lucia’s hair here and there.

IMG_2641

The fibers ended up catching the light just like my own hair sparkles, and they were fun to hide into the locks of hair as I glued them on so you could just see little bits of sparkle poking through. I worked my way up the back of her ears and antlers. At this point she looked like she had some sort of unfortunate disease or strange medieval monk hairstyle:

IMG_2642

As I made it to the top of her head, I began to switch the direction of the hair to facing forward:

IMG_2643

When I got to her forehead I added lots more thick forward-facing hair to create face-framing layers and bangs. Unfortunately this is the last picture I remembered to take before I did that and finished her up:

IMG_2644

To cover up the last bit of glue on the crown of her head, the point where all her layers of hair meet and change direction, I did a trick where I attached a couple final locks of forward-facing hair, waited for the glue to catch, and then flipped them backwards before the glue was entirely dry. It’s another trick that I learned from reading Natasha’s blog and it’s also useful for creating a realistic cowlick, a little extra volume Jersey Shore bump-it style, or even a nice clean part if you use an Exacto blade to manipulate the glue while it is still wet. I wish I took a picture of this step but I guess you’ll just have to believe me again.

I also never took any pictures when I applied the final decorative touches to her hair–it involved arranging some floral craft wire and ribbon into an organic circlet and topping everything off with a big pink bow. Here are some close-ups of what it ended up looking like in the end, which can also serve as a teaser for the rest of the photos of the finished puppet in my next post!

Hairbow Close Up

Back of Hair